Flap Drive Mounts

I started by rough cutting the angle to size with the hacksaw.

I used the square to draw straight lines for a starting point. The hacksaw cuts are sort-of straight so I draw ref lines to file down to.

The part rough cut down on the bandsaw and the holes pilot drilled to #40.

The mount edge. I've definately gotten better with the bandsaw.

Edges cleaned up with a file.

Per the plans the edge has to be radiused. I used my large bastard file.

Marking and punching the mount holes for pilot drilling.

Mount holes pilot drilled - notice the hole markings showing through the holes from the plans.

Making the mirrored part.

The bracket on the right is the first part I made - cleaned up and sanded. The left is the second bracket.

Another view - the mount holes pilot drilled to #40.

We're going to Hawaii for two weeks, so there will be no updates until we get back (end of April)

< Last Home Next >